HTML Export

Fixing a Leaky Faucet

Copy and paste this into your website, blog, or anywhere that accepts raw HTML.
<h1>Fixing a Leaky Faucet</h1>
<p>This playbook provides a step-by-step guide to diagnose the cause of a faucet leak and details the procedures for repairing it, which mainly involves replacing washers and o-rings.</p>

<h3>Step 1: Identify Leak</h3>
<p>Check the faucet to determine where the leak is occurring. Common leak sources are the spout and the base of the faucet.</p>

<h3>Step 2: Turn Off Water</h3>
<p>Locate the water supply valves under the sink and turn them clockwise to shut off the water to the faucet.</p>

<h3>Step 3: Remove Handle</h3>
<p>Unscrew or pop off the faucet handle to reveal the inner components. You may need a screwdriver or an Allen wrench to do this.</p>

<h3>Step 4: Inspect Parts</h3>
<p>Check the condition of the washer and o-ring inside the faucet. Look for signs of wear or damage that could be causing the leak.</p>

<h3>Step 5: Replace Parts</h3>
<p>If the washer or o-ring is damaged, proceed to replace it with a new one that matches the size and shape of the old part.</p>

<h3>Step 6: Reassemble Faucet</h3>
<p>After replacing the necessary parts, reassemble the faucet by reversing the disassembly steps. Ensure everything is tightened and secure.</p>

<h3>Step 7: Test Faucet</h3>
<p>Turn the water supply back on and check the faucet for leaks. If the leak has stopped, the repair is successful.</p>

<h2>General Notes</h2>

<h3>Find Correct Parts</h3>
<p>Prior to disassembly, ensure you have the correct replacement washers and o-rings on hand by either consulting the faucet manufacturer or taking the old parts to the store for reference.</p>

<h3>Careful Disassembly</h3>
<p>During disassembly, keep track of all parts and how they fit together to ensure proper reassembly.</p>