Markdown Export

Light Switch Replacement

Copy and paste this into your website, blog, code repository, or anywhere that accepts Markdown.

# Light Switch Replacement
This playbook outlines the steps required to safely replace an old or faulty light switch. It includes instructions on how to handle wiring and secure new connections.

### Step 1: Safety Precautions
Turn off the power to the light switch circuit at the circuit breaker or fuse panel. Confirm power is off by using a voltage tester on the light switch.

### Step 2: Remove Old Switch
Unscrew the switch plate and remove it. Then unscrew the old switch from the electrical box and gently pull it out, exposing the wires.

### Step 3: Detach Wires
Take a picture or label the wires for reference. Then, disconnect the wires from the old switch by loosening the screws or cutting the wires close to the switch.

### Step 4: Prepare New Switch
If wires were cut, strip about 3/4 inch of insulation from the ends. Attach the wires to the new switch, matching the positions from the old switch; ground wire to green screw, live wires to brass screws, and neutral wire if applicable to the silver screw.

### Step 5: Secure New Switch
Carefully push the new switch into the electrical box, making sure the wires are not pinched or excessively bent. Screw the switch into the box and attach the switch plate.

### Step 6: Restore Power
Turn the power back on at the circuit breaker or fuse panel. Test the new switch to ensure it&#x27;s working properly.

## General Notes

### Wire Identification
Always identify wire connections before detaching them. Use colored tape or labels if the wires are not color-coded.

### Wiring Standards
Familiarize yourself with local electrical codes and wiring standards before attempting any electrical work.

### Safety Check
Double-check that the power is off using a voltage tester before working with any wires to prevent electric shock.